|
|
Post by tonyb on Mar 22, 2012 13:42:22 GMT -5
Well MOT passed and it's booked into AB garage next wed to have the carbs set up and then it's playtime  Tony |
|
|
|
Post by weavo56 on Mar 22, 2012 15:32:09 GMT -5
Nice 1 Tony , AB do a great job . Theres a butty wagon up the road too ;D
Graham
|
|
|
|
Post by tonyb on Apr 1, 2012 11:04:41 GMT -5
Going to AB was best money I'e spent in ages, much more drivable and even ticks over smoothly, only prob is it's down on power probably restricted by the bike can I've got on - more money needed  . Anyway it's tested, taxed and the sun's shinning just got back from visiting family and off for a little blast ;D Tony |
|
|
|
Post by tiger6trev (T.C) on Apr 1, 2012 13:18:23 GMT -5
Happy days feller
|
|
|
|
Post by weavo56 on Apr 1, 2012 16:29:45 GMT -5
OK , well done mate . did you get any power run graphs done. If your thinking about a new exh can have a look at Paul Gooderham. www.paulgooderham.co.uk/He made my can and he will customise it to your car . ie. I wanted the tail pipe to follow the line of the back wing so sent him pics and sizes on a photo and he did it for me They are repackable too . Graham |
|
|
|
Post by tonyb on Apr 2, 2012 13:26:12 GMT -5
Hi Graham, strangely enough I was looking at his website last night ! Power is hitting a wall at 118, AB reckon the setup should be good for another 10 or so
Tony
|
|
|
|
Post by weavo56 on Apr 2, 2012 20:41:18 GMT -5
I found the receipt for my can , it was £162 with P & P .    When Adrian did my car it came out at 111 bhp at the wheels , with the bonnet on . The other thing is you don't want the hot gases going onto the rear wing ,which you would get with the small 90deg bend thats on most cans ,something to think about . Graham |
|
|
|
Post by tonyb on Apr 3, 2012 13:52:39 GMT -5
Found out the suzuki can I've got fitted has a cat in it which explains why it gets so hot as well as being restrictive. It melts
the rubber in the mountings every few hundred miles !
Tony
|
|
|
|
Post by jonnytwoshoes on Apr 6, 2012 12:41:20 GMT -5
tony well done where did you get your seats from?.
john.
|
|
|
|
Post by tonyb on Apr 6, 2012 14:01:37 GMT -5
Cheers John, seats are JK Composites
Tony
|
|
|
|
Post by tonyb on Apr 8, 2012 10:51:22 GMT -5
|
|
|
|
Post by weavo56 on Apr 8, 2012 11:06:07 GMT -5
Hey you little tinkerer , when did you get those bike carbs , you didn't tell us about them . Where did you get them from ? What are they ?  Graham |
|
|
|
Post by tonyb on Apr 9, 2012 5:05:37 GMT -5
Well I went to Chester Sportscars to have a look at their setups and Mr Visa accidentally fell out of my pocket and into the
machine ;D, off ZXR6R and right posh-ticks over and pulls off without spiting and popping now !
Tony
|
|
|
|
Post by weavo56 on Apr 9, 2012 6:35:26 GMT -5
Yes I think they are alot better and smoother too .
I got 4 new rubber diaphrams for mine as one had a split in it .
Nice one T .
Graham
|
|
. Anyway it's tested, taxed and the sun's
