|
|
Post by tonyb on Jan 12, 2014 13:18:03 GMT -5
Thinking about weight saving and wondered about an Exo style Tiger, might be a bit too draughty though ;D imageshack.com/a/img600/9013/srcb.jpgTony PS don't seem to be able to insert picture direct anymore ! |
|
|
|
Post by tiger6trev (T.C) on Jan 12, 2014 13:28:06 GMT -5
Wow Very drafty mate looks like you've been hard at work feller.
Trev.
|
|
|
|
Post by tonyb on Jan 12, 2014 13:30:44 GMT -5
 greenshotCan do it through postimage.org and seems to be much easier ! Ye gearbox out this week, a bit more paint on the rusty chassis parts and I can start putting it back together  Tony |
|
|
|
Post by weavo56 on Jan 13, 2014 7:19:10 GMT -5
You sure do get stuck in don't you tony . Nice job mate , have you got the f/glass sides this time ?
Graham
|
|
|
|
Post by rickwatton on Jan 13, 2014 16:04:59 GMT -5
Sh1t Tony, mine looks more finished than that. To fit fibreglass sides you would need to remove front suspension set up as well.
Rick
|
|
|
|
Post by tonyb on Jan 13, 2014 16:12:03 GMT -5
Well it stops me from getting bored ;D
The plan is to do the sides in Carbon with removable panels at the
front for working on the engine etc.
Sounds a good plan but we'll see what happens !
Tony
|
|
|
|
Post by clive1 on Jan 18, 2014 19:14:06 GMT -5
I see what your doing Tony more vents than bodywork, good idea.
Clive.
|
|
|
|
Post by tonyb on Jan 19, 2014 6:55:01 GMT -5
I think it's light enough now, time to start putting bits back !  Tony |
|
|
|
Post by tonyb on Jan 19, 2014 12:31:16 GMT -5
Well I've panelled one side and it seems to work as planned   Tony |
|
|
|
Post by tiger6trev (T.C) on Jan 19, 2014 16:00:19 GMT -5
Tony where did you get your panels from?
I need some for the inner sides.
Trev
|
|
|
|
Post by tonyb on Jan 20, 2014 16:20:21 GMT -5
Carbon Mods or Easy composites, they're both the same company.
Congratulations on your elevation to God hood ;D
|
|
|
|
Post by tiger6trev (T.C) on Jan 20, 2014 17:47:03 GMT -5
Are they local or an internet job?
OH yeah Whoop Whoop
thing is Tony what comes next?
Trev.
|
|
|
|
Post by tonyb on Jan 21, 2014 2:35:37 GMT -5
Internet but usually very quick delivery, if you get some I've got
a couple of nifty tools for cutting it
Tony
|
|
|
|
Post by tonyb on Jan 30, 2014 14:53:25 GMT -5
Well I've panelled the driver's side and started under the dash but I'm still waiting for damm gearbox bits   Tony |
|
|
|
Post by tonyb on Feb 6, 2014 15:46:47 GMT -5
Finally had the gearbox back, turned out one of the shafts was cracked most of the way through so good job I had the work done. Can get one with putting it all back together now  Tony |
|
