|
Post by weavo56 on Mar 9, 2013 18:44:50 GMT -5
Hi all , took the plunge and went for a new reg . Uploaded with ImageShack Graham
|
|
|
Post by clive1 on Mar 10, 2013 11:50:24 GMT -5
Nice one Graham,will you still be speaking to the rest of us, did you see the videos on flickr. Clive.
|
|
|
Post by weavo56 on Mar 10, 2013 12:02:51 GMT -5
YES you may speak to ME . ;D ;D
They were ok , your camera or is it your phone picks up the wind alot .
Graham
|
|
|
Post by clive1 on Mar 10, 2013 12:28:54 GMT -5
It's my phone, and yes it's very windy doing 70mph and the phone held above my head, I have another 3 going through the tunnels at Conway and Penmaenmawr,very noisy[exhaust] but couldn't get them on flickr,put 2 on Sue's facebook so Trev could put them on his, Clive
|
|
|
Post by tiger6trev (T.C) on Mar 10, 2013 17:34:20 GMT -5
It's not fare I can't do that with a Q plate.
Jealous is not the word Graham.
Trev.
|
|
|
Post by weavo56 on Mar 10, 2013 17:46:47 GMT -5
Thats a bummer Trev , didn't know about that .
Just got to wait till we're in April then have to go up to DVLA office in preston and change over the docs and tax the car .
Already got the plates done off ebay only £15
G W
|
|
|
Post by weavo56 on Apr 4, 2013 15:15:49 GMT -5
Think I will fit the full size plate to the front for awhile just in case I'm stopped with the new reg on ,you never know do you . ;D ;D
Graham
|
|
tooly
Full Member
Posts: 181
|
Post by tooly on Apr 6, 2013 12:52:40 GMT -5
Hi Graham. Where can I pick up a set of side panels like you have fitted in the photo, and are they any good? Thanks. Pete
|
|
|
Post by weavo56 on Apr 6, 2013 13:58:02 GMT -5
Do you mean the half doors I have on the car ?
I had them made at Softbits for sevens . But after getting them , you could make them out of vinyl , they have a platic bar in the top to strengthen them . I had to fit the press studs myself , I put extra ones on the front edge , they lifted in the wind . They do work ,keep alot of the wind out
Graham
|
|