|
|
Post by rickwatton on Oct 21, 2014 15:01:09 GMT -5
|
|
|
|
Post by clive1 on Oct 21, 2014 16:42:11 GMT -5
Hi Rick, Thanks for that i'll get some ordered. Clive.
|
|
|
|
Post by weavo56 on Oct 21, 2014 17:33:40 GMT -5
The metal ties can be a pain I used jubilee clips to hold the tape on .
Also put it on WET then it will shrink and give you a tighter fit .
I ended up spray painting mine as the ends started to fray .
G W
|
|
|
|
Post by clive1 on Oct 21, 2014 18:40:58 GMT -5
Thanks Graham will do. Clive.
|
|
|
|
Post by Paul on Oct 22, 2014 9:43:42 GMT -5
Two excellent ideas, Graham....I hadn't thought about putting it on wet.....and I still have three to do, so will use your suggestion.
|
|
|
|
Post by clive1 on Oct 22, 2014 10:30:12 GMT -5
Hi Paul how are you doing with your other jobs,[clutch & radiator] Clive.
|
|
|
|
Post by weavo56 on Oct 22, 2014 11:36:53 GMT -5
Ok mate , nice one .
G
|
|
|
|
Post by rickwatton on Oct 22, 2014 12:08:20 GMT -5
You must have missed that part of the conversation at the pub meet Paul lol
Rick
|
|
|
|
Post by Paul on Oct 22, 2014 12:59:36 GMT -5
Rick....yes, guess I did  ?. Fitting my rad on Friday...once I've done it, the Motorsport people want me to ring them..to book it in for pedals. First they'll try to completely repair existing pedal, so it works perfectly. If not possible, they will try to fit my single new clutch pedal. Again, if not possible, we will discuss, and then fit a completely new assembly, floor mounted, using all new pedals including a brake bias bar and two new master cylinders for the brakes. Sod the bloody cost....I just want this done!! |
|
|
|
Post by Paul on Oct 22, 2014 13:00:52 GMT -5
Ooooo... I just got a swearword through the censorship on this site.....
|
|
|
|
Post by rickwatton on Oct 22, 2014 13:59:38 GMT -5
What rad are putting in Paul i have just rerouted the pipes on mine as they were to close to the exhaust for my liking so if you are using the polo rad give me a shout and i'll send you aphoto
Rick
|
|
?.