|
|
Webers
Sept 14, 2009 14:30:19 GMT -5
Post by tonyb on Sept 14, 2009 14:30:19 GMT -5
Anyone know anywhere good with Webers in Wrexham area,
mine have developed a mystery petrol leak !
|
|
|
|
Webers
Sept 14, 2009 15:39:25 GMT -5
Post by mikelr on Sept 14, 2009 15:39:25 GMT -5
Tony.
A.B. Garage
Unit 167b.
Hawarden Industrial Park.
Manor Lane
Hawarden
CH5 3QX
01244 537701
Highly recommended by all that use them, they fixed my Webbers when I had a problem. Give them a ring.
(not the nearest though ! )
Mike
|
|
|
|
Webers
Sept 15, 2009 15:02:01 GMT -5
Post by tonyb on Sept 15, 2009 15:02:01 GMT -5
Cheers Mike, I'll give them a try
|
|
|
|
Webers
Sept 18, 2009 15:40:24 GMT -5
Post by jonnytwoshoes on Sept 18, 2009 15:40:24 GMT -5
;)tony.
if you hvn,t sorted carbs out yet, try checking the brass screw that holds your venturi into position,there should be a locking washer with it and a hole in the top of your screw so you can lock wire it. i had same problem, before s.v.a test in june, it kept spewing petrol out of left hand trumpet, found the screw was loose and not locked. carbs were brand new from vulcan engines. just a possibility.
john.
|
|
|
|
Webers
Sept 25, 2009 14:18:23 GMT -5
Post by tonyb on Sept 25, 2009 14:18:23 GMT -5
Seems to be OK, Think I'll just take it to A&B
Tony
|
|
DaveB
Full Member
Posts: 191
|
Webers
Oct 8, 2009 7:12:09 GMT -5
Post by DaveB on Oct 8, 2009 7:12:09 GMT -5
Tony, I have noticed on mine that there was a deffo smell of petrol with ignition on, traced it back to the rear weber, could see it dripping in the venturis and running back to the front plate.
You need to remove both filters and switch ignition on so fuel pump is running.
I had to adjust the float height on mine to stop it overfilling. Very simple job and took about 30 mins.
|
|
|
|
Webers
Oct 13, 2009 12:53:55 GMT -5
Post by tonyb on Oct 13, 2009 12:53:55 GMT -5
I've cleaned out the needle valves and that seems to have
sorted it !
|
|
